From yahoo Sent Wed, Oct 12th 2016, 11:36
From yahoo Sent Wed, Oct 12th 2016, 11:36
> Hello,
>
> The pulse wave of PVCO at lfo speed doesn't work well with the
> A-160 clock divider on my system. It skips beats and stutters. I
> tried to send the pulse through the trigger modifier module but
> that did not help. A-160 works with everything else. I have the
> pVCO connected to the CV bus (receiving from the precision
> adder). Could that have any effect? Thanks,
>
> Cheers,
>
> Martin
From the theory it should work - at least with a pulsewidth not close to 0%
or 100% (e.g. 10% - 90% should work). I'll have to try out the
A-111-3/A-160-1 combo. Unfortunately I have no A-111-3 left because the
first production series is completely sold out. But I'll try an A-111-2
which uses nearly the same circuitry.
Best wishes
Dieter Doepfer
------------------------------------
------------------------------------
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Doepfer_a100/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Doepfer_a100/join
(Yahoo! ID required)
<*> To change settings via email:
xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx
xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> To unsubscribe from this group, send an email to:
xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/