From iso-8859-1 Sent Fri, Feb 19th 2016, 15:16
From iso-8859-1 Sent Fri, Feb 19th 2016, 15:16
Thank you, Florian!
>> I'm running the pitch CV through an A-185-1 first, so buffering hopefull=
y shouldn't be an issue.
> If I understand the comment on the http://www.doepfer.de/a171.htm (yes,=20
> this one! Not the 1712.htm) right, then the buffer must be AFTER the=20
> slewlimiter (=3Dat the output), not before/at the input.
You're right, thanks! I'll try them in that order.
> Also it looks to me, that the A-172-2 is not really intended for the=20
> usage with a VCO.
Do you (or does anyone else for that matter) know if the A-170 or A-171 is =
more designed for slewing pitch CVs in particular than the A-172-2? That pa=
ragraph you quoted suggests that either of those two should be fine for wha=
t I'm trying to do, but if anyone could verify this before I buy another sl=
ew module, I'd appreciate it!
Thanks!
Zo=EB.
------------------------------------
------------------------------------
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Doepfer_a100/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Doepfer_a100/join
(Yahoo! ID required)
<*> To change settings via email:
xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx=20
xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> To unsubscribe from this group, send an email to:
xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/