From yahoo Sent Wed, Dec 23rd 2015, 15:52
From yahoo Sent Wed, Dec 23rd 2015, 15:52
> Hi all
>
> Not to interrupt the holiday festivities but I have a question about the Ribbon controller I finally received.
>
> I havent had a lot of time with it yet but so far I am getting zero voltage out of the CV2 output. Is there something I
> have to do to turn that on? I cant see anything in the manual, it looks like I should be seeing something there when I
> apply pressure to the ribbon. Is there anything I need to know to get that working? CV1 works perfectly (I think!).
>
> Thanks and merry holidays etc!
>
> Scott
Please refer to the R2M user's manual. The default for the pressure sensor is "off" (manual page 9 / menu 2). You have to assign any
function to the pressure sensor (e.g. pitch or control change, details on page 13).
Best wishes
Dieter Doepfer
------------------------------------
------------------------------------
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Doepfer_a100/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Doepfer_a100/join
(Yahoo! ID required)
<*> To change settings via email:
xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx
xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> To unsubscribe from this group, send an email to:
xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/