From yahoo Sent Wed, Mar 18th 2015, 08:33
From yahoo Sent Wed, Mar 18th 2015, 08:33
> OK, so I have just installed the A-147-2 and its pretty cool so far. Took me some time to get my head around the
> internal patching and once I worked out that both the LFO reset and Delay rest needed me to adjust me A-1190-3 Gate level
> from +5v to +12v all was working well.
>
> Dieter it might be worth noting that the reset level on these inputs needs to be quite high in order to reset to 0v (last
> least this was the case for me). Also, red LEDs would have been fine I think, as it is rather odd when none of the other
> system LEDs change colour on the negative sweep, and none of my other modules have green or blue lights. Mainly this
> affects how I see my system aesthetically, and others may disagree!
>
> Overall a lovely new module though, well done to you and your team :)
>
> Neil
Hello Neil,
thank you for your comments. A +5V level should reset to 0V. The LEDs with different colours are based on suggestions of many
customers. But of course it's a matter of taste.
Best wishes
Dieter Doepfer
------------------------------------
------------------------------------
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Doepfer_a100/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Doepfer_a100/join
(Yahoo! ID required)
<*> To change settings via email:
xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx
xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> To unsubscribe from this group, send an email to:
xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/